The IC200CH003 is a connectorized I/O carrier from GE Fanuc Automation.

The IC200CH003 I/O carrier weighs 0.113 kg and has a 36-pin connector for input/output cables.

The carrier provides backplane communication, mounting, and field wiring for one input/output module.

You will find a module latch hole for securing the module to the carrier.

The carrier also provides quick connections for wiring up to 32 input/output points and 4 common power connections.

During rail mounting, the IC200CH003 I/O bracket snaps easily into the DIN rail.

The dimensions are as follows: 7.5 mm x 35 mm: 7.5 mm x 35 mm.

For EMC protection, the DIN must be electrically grounded. The rail must also be electrically conductive and corrosion resistant.

The field wiring can be connected directly to the connector itself by means of contacts crimped onto the end of the wires.

I/O devices can be connected directly to the mating I/O terminals. To install a prewired connection cable, place the cable connector over the connector on the carrier and press down until the latch engages the connector.

To remove the cable, you must hold the connector and press the latch upward to release the connector.

Occasionally, the operating equipment may become hot due to high ambient temperatures. In this case, handle the connector carefully.

Do not touch them directly. Also, avoid exposed connector pins.

Connector kits for making customized cables are available and include a connector and a cover, 6 large contacts, 2 screws, and 36 small contacts.

The IC200CH003 carrier can be used with all VersaMax modules except the following, which have higher isolation requirements:

IC200MDL144 4-Point Isolation Module with Voltage Input 240 VAC

IC200MDD850 Hybrid 240 VAC 4-point Isolation Module

Output Relay 2.0A Isolated 8-Point Module

The Versamax IC200CHS003 Carrier is a connectorized I/O carrier.

The IC200CHS003 carrier has a 36-pin connector for connection to I/O cables.

About the IC200CHS003

The IC200CHS003 carrier is a connectorized I/O carrier that is part of GE Fanuc’s Versamax family of I/O products.

The IC36CHS200 carrier has a 003-pin connector for connecting I/O cables.

The IC200CHS003 bracket provides mounting, backplane communications, and field wiring for one I/O module.

The IC200CHS003 bracket measures 2.63 x 5.25 inches and is mounted on DIN rail measuring 7.5 mm x 35 mm.

Compatible modules are mounted vertically on the IC200CHS003 bracket perpendicular to the DIN rail.

GE Fanuc recommends using corrosion-resistant, unpainted DIN rails. It is also recommended that the DIN rail be grounded to provide EMC protection.

For applications requiring resistance to mechanical shock and vibration, the IC200CHS003 bracket should be mounted inside an industrial panel.

I/O devices can be connected to the plug-in I/O terminals on the IC200CHS003 carrier.

Connection to the IC200CHS003 connectorized carrier is via cable.

Available cables include the IC200CBL105 cable (2 connectors, 0.5 m, unshielded), the

IC200CBL110 cable (2 connectors, 1 meter, unshielded), the

IC200CBL120 cable (2 connectors, 2 meters, unshielded) and IC200CBL230 cable (1 connector, 3 meters, unshielded).

A notch is provided on the connector to indicate pin orientation.GE Fanuc offers a connector kit for building custom cables.

The kit part number is IC200ACC304.

Due to isolation requirements, the IC200CHS003 carrier can be used with all Versamax I/O modules.

The exception is the following modules: IC200MDL144. IC200MDL244. and IC200MDD850 modules.

The IC200CHS003 carrier can accommodate the following current levels: 8 amps of power and ground current, and 2 amps of point current.

The module can withstand voltage transients up to 300 volts AC.

Applications: power, oil, gas, chemical, turbine, marine, nuclear, substation, aerospace, metallurgy, mining, steel, aluminum, etc.

Control system: plant control and monitoring system (DCS/PLC) equipment control system ship control system production control system equipment control system

Energy management systemPower monitoring systemFrequency conversion servo systemMedium voltage power systemShaft vibration analyzerInfrared flame detectorGas analyzerCombustion fluctuation monitoring system and so on.