Call us 24/7+86 15396212224

Rexroth 0811405157 p/Q Closed loop control amplifier

Applications

The “1-channel p/Q control card” consists of the basic card in Europe format with DC/DC converter and front plate. With the “2-channel p/Q control card”, this basic card contains a p/Q daughter card with identical circuit and a joint front plate.

The supply voltage is 24 V =. The voltage of the valve to be regulated is not supplied via this card.

Input variables for the cards are the valve position command value, the pressure command value, the actual pressure value and possible control mode signals. The pressure sensors with voltage interface receive their voltage supply from the card (z6/z8). At the card, pressure sensors with voltage and current signal can be connected.

The pressure command value can be specified by means of a potentiometer. The potentiometers can be supplied from the card (z32/b12).

For control and comparison, the front plate and the circuit board comprise test points for the most important characteristics.

The circuit of the “2-channel card” is designed so that the controllers on basic and daughter card work in a completely independent manner. In this mode, the card is suitable for controlling 2 valves with integrated electronics.

An additional channel mode circuit allows for the considerable extension of the www.honeywell-diver.com possible applications of the described card.

Features

– Suitable for controlling high-response valves with in stalled electronics

– Amplifier with additional electronics (daughter card)

– Analog amplifiers in Europe format for installation in 19″ racks

– Valve position control with PID behavior

– Outputs short-circuit-proof

– External shut-off for pressure controller

– Suitable for pressure sensors (1…6 V, 0…10 V, 4…20 mA)

– Supply for pressure sensors

– Cable break detection for pressure sensor

Block Diagram with Pin Assignments

Rexroth MKD071B-061-KG1-KN Servo Motor

The Indramat MKD071B-061-KG1-KN is a servo motor manufactured by Indramat, a major 20th century motion control system manufacturer.

We specialise in Indramat motion control. We have the largest inventory of emergency replacement components in the country. We offer 24-hour factory repair turnaround.

Learn about MKD071B-061-KG1-KN

Indramat’s MKD motors are a family of servo systems in a variety of sizes.

Frame sizes range from 025 to 112. A, B, C, and D frame lengths are available.

The MKD071B-061-KG1-KN has a frame size of 071 and a frame length of B. The MKD071B-061-KG1-KN has a frame length of B.

These servo motors are designed to provide cost-effective automation for industries that www.honeywell-diver.com require power and reliability.

Some of the advantages of the MKD series:

High Reliability

Maintenance free operation with brushless design and grease lubricated bearings

Suitable for harsh environments

Overload protection through thermal monitoring and winding cooling

Simple and flexible installation

High performance

These features make the MKD series motors ideal for food preparation and packaging, machine tools, automation and assembly, and printing and packaging applications.

MKD071B-061-KG1-KN has a junction box and a holding brake. Cables are sold separately.

Modular Design

Indramat components benefit from a modular design. As soon as a faulty component is found, it can be removed from the machine and replaced with a working component of the same type. With the correct parameters, the machine can be started again immediately, avoiding downtime.

Rexroth R901342038 HM20-21/315-F-C13-0.50 Pressure sensors

Description

The Bosch Rexroth HM 20-2X/315-F-C13-05-N (R901342038) is a high-precision pressure

transducer designed for monitoring and controlling hydraulic pressures within a wide range of applications.

This sensor is capable of measuring pressures with ranges up to 600 bar,

making it suitable for various demanding environments where accurate pressure readings are critical.

The transducer features a thin film measuring cell and components that come into contact with

media are constructed from stainless steel, ensuring durability www.honeywell-diver.com and compatibility with a variety of fluids.

With its excellent non-repeatability of less than 0.1% and an accuracy class of 0.5,

the HM 20-2X/315-F-C13-05-N provides reliable and precise measurements essential for maintaining system performance and safety.

The device also boasts operational safety features including high bursting pressure capacity,

reversed polarity protection, overvoltage protection, and short-circuit protection.

This model operates within an extensive temperature range, ensuring consistent performance under varying environmental conditions.

Additionally, it has received marine approval DNVGL for all variants with current output,

which attests to its robustness and suitability for maritime applications.

The component series X to which this transducer belongs indicates

that it is part of a line designed to handle maximum operating pressures of up to 315 bar.

It offers pressure ratings at several intervals including 100, 160, 250, 315, 400, 600 bar etc.,

providing flexibility for integration into different hydraulic systems. Furthermore,

the HM 20-2X/315-F-C13-05-N is cULus-listed demonstrating compliance with

North American safety standards and regulations for industrial control equipment.

Features

Measuring pressures in hydraulic systems 8 measurement ranges up to 630 bar Sensor with

thin film measuring cell Components that are in contact with the media are made of stainless

steel Operational safety due to high bursting pressure, reversed polarity,

overvoltage and short-circuit protection Accuracy class 0.5 Excellent non-repeatability

< 0.05 % Wide operating temperature range –40 … +85 °C Marine approval DNV-GL for all variants with current output.

Rexroth Pressure transducer HM20 R901466598

Features

▶ Measuring pressures in hydraulic systems

▶ 8 measurement ranges up to 630 bar

▶ Sensor with thin film measuring cell

▶ Components that are in contact with the media are made of stainless steel

▶ Operational safety due to high bursting pressure,reversed polarity, overvoltage and short-circuit protection

▶ Characteristic curve deviation <0.5%

▶ Non-repeatability <±0.05%

▶ Ambient temperature range –40 … +85 °C

▶ Marine approval DNV for all variants with www.honeywell-diver.com current output

Weight kg 0.06

Nominal temperature range °C –25 … +80

Ambient temperature range °C –40 … +85

Storage temperature range °C –40 … +80

Medium temperature range °C –40 … +90

Sine test according to DIN EN 60068-2-6 10 … 2000 Hz/maximum of 10 g/10 cycles/3 axes

Noise test according to DIN EN 60068-2-64 20 … 2000 Hz / 14 gRMS / 24 h / 3 axes

Transport shock according to DIN EN 60068-2-27 15 g / 11 ms / 3 axes

Pressure port 1) G1/4 threaded port according to DIN 3852 form E

Housing materials V4A (1.4404), PEI, HNBR

Material process interface with measuring cell 1.4542 (17-4 PH / 630); seal ring NBR

Throttle material 1.4305

Throttle element In the pressure channel of the process interface. It corresponds

to a nozzle of 0.3 mm and reduces the risk of damage during

highly dynamic effects such as pressure peaks or cavitation.

Pressure media HL, HLP, HFC, nitrogen 2), others upon request

Tightening torque ▶ Hydraulic connection <400 bar Nm 20 … 25

≥400 bar Nm 25 … 30

▶ Mating connector Nm 0.6 … 1.5 3)

Electrical connection Device connector, 4-pole, M12 x 1 at the housing 4)

Protection class according to EN 60529 IP65/IP67 (if suitable and correctly mounted mating

connectors are used)

Life cycle 60 million load cycles or 60000 h

Conformity ▶ CE according to the EMC directive

▶ UKCA according to “UK EMC Regulations”

Approvals cULus-listed

DNV marine certification

(For marine applications within the scope of marine approval,

additional surge protection is required! Based on

IACS-Unified Requirements E 10)

Search for products

Back to Top
Product has been added to your cart