Call us 24/7+86 15396212224

Emerson DeltaV™ Smart Switches Plug and Play Industrial Switches

DeltaV™ switches are plug-and-play industrial switches with enhanced security features

New and improved hardware and software platforms with increased focus on security and improved performance

Fully managed by the DeltaV™ system

Automatically reports network alarms and diagnostic information to DeltaV workstations

Can be installed on the network between DeltaV workstations and Emerson’s Intelligent Firewall (DeltaV 2.5 network)

Plug-and-play installation

Automatic security lockout

Full range of industrial-grade fanless switches

Fully supported by Emerson

Introduction

The new DeltaV™ network “smart” switches are the next generation in the use of commercial off-the-shelf (COTS) components in control systems.

These switches combine the low cost of off-the-shelf components with www.honeywell-diver.com DeltaV-specified software and features that

making it more integrated and plug-and-play in the DeltaV Area Control Network (ACN) and other DeltaV networks outside the ACN.

The DeltaV Smart Switch requires no configuration to operate in a DeltaV network.

Access to advanced features requires minimal configuration and is easily accomplished using the DeltaV Network Device Command Centre.

This ensures that all Smart Switches on the network are configured consistently and securely, and that the performance of the DeltaV system is not compromised by misconfiguring any switch function.

This dedicated switch allows the DeltaV system to provide an advanced security feature of automatic port lockout, which can be easily implemented by the control system user.

Control system users can easily implement this feature: an increasingly important product feature in today’s harsh environments.

The DeltaV Smart Switch is also pre-configured to utilise features in the latest software releases, such as ARP sniffing and enhanced security features.

(The DeltaV Smart Switch is also preconfigured to detect certain man-in-the-middle attacks using features in the latest version of the software, such as ARP sniffing and enhanced port locking algorithms: ARP spooffng detection and enhanced port locking algorithms.

Benefits

Enhanced security. The new generation of DeltaV Smart Switches is based on a more powerful hardware and software platform with an increased focus on security.

The new hardware features powerful CPUs for control plane and management operations.

The software has many new features such as role-based access, secure user and password management, brute force attack protection, audit trails and user-readable event logs.

There is also a new HTML5 web interface that can be accessed through the Network Device Command Centre, making it easy to upgrade the switch software.

The next-generation switch also offers more flexible configuration options.

Improved performance. The switching ASICs used in these new products offer new capabilities

such as increased network buffers, the ability to process/forward/filter packets based on more L2 address information such as IP addresses, UDP or TCP ports, and a non-blocking architecture.

and non-blocking architecture, in addition to more powerful CPUs for control plane and management operations.

Fully managed by DeltaV. The DeltaV Switch Commissioning application automatically discovers the switch in the Network Device Command Centre (formerly the Smart Switch Command Centre) when the switch is started.

Network addresses are automatically assigned by DeltaV DCS or by the user when installed in a DeltaV 2.5 network (new in DeltaV v13.3).

Simply provide the switch name and description and select a few setup parameters and the switch will begin reporting. A serial connection is no longer required to configure the switch.

Automatic reporting of network alarms and diagnostics to DeltaV workstations. Operators and maintenance stations will automatically receive device alerts that indicate abnormal network communications.

The DeltaV Network Device Command Centre application provides an interface for diagnosing and troubleshooting network problems. All of this is built-in, eliminating the need for third-party applications for network monitoring.

Plug and Play Installation. The new generation of DeltaV Smart Switches feature a DeltaV-compatible setup that installs out of the box into a compatible DeltaV network.

They require no user configuration to fully support DeltaV network communications.

NDCC ensures that the configuration of all Smart Switches on the network remains consistent, so you never have to worry about misconfigurations affecting network performance.

Plug and Play requires that any existing switch or network device be configured for 100/1000 full-duplex communication or auto-negotiation.

Auto-lock prevents unauthorised network connections. Disabling unused network connections is a security “best practice” that helps you comply with factory security policies.

With the switch’s built-in one-click lockout feature, you simply click a button in the DeltaV Network Appliance Command Centre application to

to automatically lock all unused network ports on your system. Easily protect your network from intrusion.

The port locking algorithm has been enhanced to allow locking of multiple daisy-chained DeltaV nodes, as well as detection of new nodes within dynamically determined uplink ports.

You can also configure the switch to ignore lockdown commands on specific switch ports if the application requires it.

For example, a port connected to a virtualised host server to allow DeltaV VMs to move between hosts.

Accessing the Console. Secure Shell (SSH) and serial connections are provided using a USB-C cable (except for the RM2040).

The Advanced Configuration menu includes a handful of settings that allow you to customise the switch for your specific use case while conforming to the requirements of the DeltaV Regional Control Network.

SSH communications provide a secure connection to the switch console.

Encryption in SSH communications provides additional security for switch operation and maintenance by protecting user credentials and preventing interception.

Full range of switch hardware configurations. The new generation of DeltaV network switches offers a wide range of hardware solutions.

From 30-port rackmount units to ffxed-port DIN-rail switches, DeltaV network switches meet a wide range of network requirements.

The extensive line of DeltaV Smart Switches is all you need to implement a complete DeltaV control network.

Emerson provides full support. As an Emerson product, these DeltaV network switches are fully supported by Emerson when used in a DeltaV network.

Emerson AMS 2140 Mechanical Health™ Analyser

Vibration analyser offers powerful user experience

AMS 2140 Machinery Health™ Analyser The AMS 2140 is the most comprehensive tool for assessing and predicting machinery health

The AMS 2140 builds on Emerson’s industry-leading CSI 2130 to make path-based maintenance more efficient and predictive diagnostics more practical.

predictive diagnostics more practical. the AMS 2140 is guided by human-centred design principles.

The AMS 2140 follows human-centred design principles and is user-focused to meet the availability and advanced diagnostic requirements of reliability engineers.

With more than 25 years of expertise in vibration analysis, Emerson’s portable analysers provide the most powerful user experience for predicting equipment problems.

Routes can be executed more efficiently with faster data acquisition and four-channel acquisition capabilities.

The extra time is then used for higher value tasks such as data analysis, root cause analysis and maintenance planning.

Use a wireless hotspot in the device to send data directly from ffeld back to the maintenance shop.

When you start another route, analysts in the maintenance shop can start analysing the data, so you can collect and analyse data at the same time.

Or send data back to a central database from a remote plant location so that it can be viewed by key stakeholders within your organisation.

Designed for you

Four-channel data collection makes bearing analysis easier and faster

Better understanding of shaft motion and machine transients with four-channel diagnostics

Longer battery life for a full shift (or more) without recharging

Full-colour touchscreen for easy navigation and detailed fault analysis, even when wearing gloves

Large screen automatically adjusts to ambient light so you can see what you need to see, wherever you are

Slim housing for comfortable one-handed operation

Fastest data acquisition speed on the market, so you spend less time in harsh environments

Advanced analysis tools, including cross-channel and transient analysis, www.honeywell-diver.com help identify root causes

Comfortable shoulder strap and built-in stand make the analyser easy to use

Bluetooth wireless communication with headset for ease of use

Predictive diagnostics help you determine the root cause of equipment problems

Versatile advanced diagnostics improve machine health

The AMS 2140 offers the industry’s most complete set of features to quickly and accurately assess the health of rotating machinery.

Even the most complex machinery in your facility. With the AMS 2140

You can perform single-, dual-, or quad-channel vibration analysis, cross-channel analysis, transient analysis, structural analysis, balancing, and motor monitoring.

The analyser’s embedded intelligence guides you through advanced diagnostic tools, providing pre-configured menus and preset technology settings.

Troubleshooting documentation in the AMS 2140 helps with initial analysis, and AMS Suite integrates with the analyser for more in-depth analysis of data.

Take only one tool to the field

When you head out to the field on a collection mission, you don’t want to have to carry multiple tools.

The AMS 2140 provides you with a single platform that enables you to perform a wide range of machine health tests.

Balancing, temperature trending, and motor diagnostic functions coexist with vibration analysis tools.

Data from all of these tests is loaded into a database that allows you to trend the data from the various tests.

This gives you a more complete picture of the machine’s condition and predicts when corrective maintenance is required.

The AMS 2140 is suitable for a wide range of rotating equipment, including variable speed machines, complex gearboxes, low speed equipment, turbomachinery, sleeve bearings, gearboxes, and more.

equipment, turbomachinery, sleeve bearing machinery and reciprocating compressors.

Emerson AMS 6500 Protection Monitor Configuration

Pre-configured user-selectable measurement types simplify software configuration

Password protection with 4 user login levels and customisable access rights

Context-sensitive help information to quickly resolve set-up issues

Includes trending, time functions, order analyses and start/stop data for comprehensive setup.

Configuration includes setup of basic predictive functions, including troubleshooting and diagnostics

Applications

The AMS 6500 Configuration Software for Machinery Protection allows you to configure protection modules, view real-time vibration monitoring systems and sensor health.

The intuitive configuration process begins with the selection of the card type. Next, the configuration software displays a simple table view.

All configuration settings are clearly visible. Tabs help you categorise www.honeywell-diver.com information between inputs, outputs, advanced machine diagnostics and management tasks.

diagnostic and management tasks. The allowable range for each required entry is clearly visible to help you understand the range of the parameter.

Preset parameters are automatically loaded when using Emerson sensors and transducers.

Real-time data can be displayed during system configuration to verify that wiring, card settings, and instrumentation are healthy and properly connected.

Real-time information such as gap voltage, waveform data, and overall vibration data can be viewed.

Ongoing maintenance functions such as resetting latching relays or loading saved configurations can be easily performed via software.

The software can be run on a PC or laptop.

The System Configuration Software allows you to configure the following monitors of the A6000 series

The following monitors of the A6000 series can be configured:

a6110. a6120. a6125. a6140. a6150. a6151. a6210. a6220. a6310. a6312. a6312-8.

a6410. a6620. a6630. a6740.a6740-10. a6824. a6824r

Basic Predictive Features

The AMS 6500 Configuration Software has a number of built-in trending functions that allow basic troubleshooting and prediction of the machine.

Master value trends are graphically represented, showing both card health and alarm values. The software can display vibration signals as a function of time,

The software displays the vibration signal as a function of time, the date of the FFT analysis with a resolution of up to 400 lines, and the FFT phase data. The software also displays the last time the machine was started or stopped.

The configuration software visualises the data and displays velocity over time and vibration over velocity for each channel.

Configuration Software

The configuration suite contains the following sections:

CD-ROM containing the configuration of the AMS 6500 protection module

Installation instructions

2 metre configuration cable with 9-pole SUB D plug and 6-pole miniature DIN diode plug for connection to AMS 6500 Protection Monitor

9-pole SUB D DV adapter on 25-pole SUB D, type AB914F

Two adapter cables with SMB coaxial plugs on both sides for connection of oscilloscopes to the AMS 6500 Protection Monitor.

Length 3 metres, supplied by Radiall, type 296-201-794

Two adapters BNC/SMB R191 209. supplied by Radiall

USB to RS232 adapter

Configuration programme

The configuration software package contains the following programmes:

A6910 Configuration Software for AMS 6500 Protection Monitor

System requirements

To load the programme, the PC or laptop must fulfil the following minimum prerequisites:

Standard PC/laptop, Pentium II or higher, minimum clock frequency 500 MHz, CD-ROM.

RS232 interface port (or USB (when used with an external USB to RS232 converter)).

Operating System Windows 2000. Windows XP, Windows Vista or Windows 7

Emerson DeltaV™ VerticalPlus Input/Output Subsystem Carrier

Functional features:

Designed for SIS

Modular design for flexible installation

Allows for online expansion

Increased I/O density

I/O density for cabinet-mounted systems

Introduction to the DeltaV™ VerticalPlus I/O Rack

Keep your I/O subsystems running efficiently with DeltaV™ VerticalPlus I/O Racks.

The VerticalPlus platform allows you to integrate DeltaV www.honeywell-diver.com SIS logic solvers vertically, giving you the flexibility you need for cabinet design.

Power supplies/controllers and I/O carriers are modular.

You buy only what you need, but rest assured that as your system grows, you can add plug-and-play carriers-it’s easy!

The Advantage

Designed specifically for SIS. The redesigned carrier supports simplex and redundant SLS modules.

These modules communicate via a redundant safety bus, which is separate from the BPCS communications.

The VerticalPlus carrier also communicates with other SIS nodes on the vertical and horizontal carriers via redundant SISNet repeaters.

The modular design allows for flexible installation. A single T-shaped DIN rail is all that is needed to mount the power/controller carrier in place.

Fieldbus power is now independent for each individual card.

The modular design approach of the DeltaV system allows you to add I/O carriers as needed.

Allows you to expand online. Additional carriers can be added online as needed.

Increases the density of the cabinet-mounted system. Six I/O carriers can be mounted on one side of a standard 1200mm x 600mm x 2200mm cabinet.

Product Description

The VerticalPlus I/O Interface Carrier plugs into the 4-Wide Power/Controller Carrier, which provides power to the system and communication between the I/O interface and the controller.

The controller processes I/O interface information through the control module.

The VerticalPlus I/O Interface Carrier provides a separate bus field power connection for each I/O card.

The carrier is designed to support the same terminals as the horizontal carrier.

The carriers are mounted on T-shaped DIN rails. Each I/O interface carrier is supplied with connectors for direct mating together.

A single I/O subsystem supports a total of eight 8-width I/O interface carriers for a maximum of 64 local I/O interface cards.

Cable extenders are used to connect carriers that cannot be installed next to each other, allowing the carriers to be arranged in standard equipment cabinets.

The extender has two 22-pin D-type connectors and supports a dual cable fault-tolerant configuration.

Ports A and B are connected in parallel so that either port can be used.

The new Dual Carrier Extender also supports the redundant secure bus coaxial connectors used by DeltaV SIS.

The total length of the I/O bus is 6.5 metres (21.3 feet).

The VerticalPlus carrier can also be used for Zone 2 remote I/O devices to provide installation flexibility.

Related Product Recommendations:

IC660TBD024K Genius I/O Terminal Assembly Module

IC687BEM713B Fanuc 90-70 Series Bus Transmitter Unit

369-C101 Motor Management Relay

369-LO-0-M-F-E-0-0 Motor Management Relay

IC698PSA100 Fanuc RX7i Series Central Processor

DeltaVrm VerticalPlus Input/Output Subsystem carrier

FBM203 P0914SV Channel Isolated 8-Input RTD

FBM204 P0914SYI/O Module 4 Channel

369-HI-R-M-F-E-H-E Motor Management Relay

44A751101-G01 Processor Module

8115-DO-DC 8-Channel Digital Output Module

Emerson PR 6423 Non-Contact Eddy Current Sensor

The PR 6423 is a non-contact eddy current sensor of rugged construction designed for extremely critical turbomachinery applications, such as steam, gas, compressor and water turbomachinery, blowers and fans.

Examples include steam, gas, compressor and water turbomachinery, blowers and fans.

The purpose of the displacement probe is to measure position or shaft motion without contacting the surface under test (rotor).

In sleeve bearing machines, a thin film of oil separates the shaft from the bearing material.

The oil acts as a damping agent so that shaft vibrations and position are not transmitted through the bearing to the bearing housing.

Vibrations due to shaft movement or position are greatly attenuated by the action of the bearing oil film.

The use of housing vibration sensors to monitor sleeve bearing machines is therefore discouraged.

The ideal method of monitoring shaft position and motion is through the www.honeywell-diver.com bearing or a non-contact eddy current sensor mounted inside the bearing.

PR 6423 is commonly used to measure machine shaft vibration, eccentricity, thrust (axial displacement), differential expansion, valve position and air gap.

Non-contact measurement of static and dynamic shaft displacements

– Shaft and radial displacement (position)

– Shaft eccentricity

– Shaft vibration (motion)

Meets international standards DIN 45670. ISO 10817-1 and API 670

Rated for use in explosive areas, Eex ib IIC T6/T4

Other displacement transducer options include PR 6422. PR 6423. PR 6424. and PR 6425

Choose from CON 011/91. 021/91. 041/91 and other converters and cables for a complete transducer system

Related Product Recommendations:

IC660TBD024K Genius I/O Terminal Assembly Module

IC687BEM713B Fanuc 90-70 Series Bus Transmitter Unit

DS200FCGDH1B GATE ASSIGNMENT AND STATUS CARD (FCGD)

RS-FS-9001 362A1052P404 Flame Sensor/Detector

IC754CSX06CTD General Electric Quick Panel Touch Screen

44A751101-G01 Processor Module

8115-DO-DC 8-Channel Digital Output Module

DeltaVrm VerticalPlus Input/Output Subsystem carrier

FBM203 P0914SV Channel Isolated 8-Input RTD

FBM204 P0914SYI/O Module 4 Channel

369-HI-R-M-F-E-H-E Motor Management Relay

369-C101 Motor Management Relay

369-LO-0-M-F-E-0-0 Motor Management Relay

Emerson A6140 Dual Channel Shaft Absolute Vibration Monitor

Functional Features:

Dual-channel, 3U-sized, 1-slot plug-in modules cut cabinet space requirements in half compared to traditional four-channel 6U cards

API 670-compliant, hot-swappable modules

Pre/post buffered and proportional outputs, 0/4-20 mA outputs, 0 – 10V outputs

Self-test features include monitoring hardware, power inputs, hardware temperature, sensors and cables

Used to connect a displacement sensor and a seismic or piezoelectric sensor

or piezoelectric sensor so that the combined output is an absolute value of the axis relative to free space

For use with displacement transducers 6422. 6423. 6424. and 6425 as well as actuators CON 011/91. 021/91. 041/91. and case-mounted piezoelectric velocity sensors

The Shaft Absolute Vibration Monitor is designed for high reliability in the plant’s most critical rotating machinery.

This 1-slot monitor is used with other AMS 6500 www.honeywell-diver.com monitors to form a complete API 670 machinery protection monitor.

Applications include steam, gas, compressor and hydraulic turbine machinery.

The primary function of the absolute shaft vibration monitoring module is to accurately monitor absolute shaft vibration, to

The main function of the shaft absolute vibration monitoring module is to accurately monitor shaft absolute vibration and reliably protect the machinery by comparing the vibration parameters to alarm setpoints and actuating alarms and relays.

The shaft absolute sensor system consists of a relative displacement sensor and a vibration sensor mounted in the same housing.

The displacement sensor is a non-contact sensor that measures shaft position and movement relative to the housing, the

while the vibration sensor mounted in the housing is used to measure the absolute position of the housing relative to free space.

The two sensors are phase compensated for different units and mathematically subtracted to obtain the absolute displacement of the shaft relative to free space.

Absolute shaft vibration is an important measurement used for prediction and protection monitoring on all sleeve bearing machines.

Absolute shaft vibration should be selected when the bearing box and rotor masses are closely matched, as the bearing box may move significantly during machine operation.

The AMS 6500 is an integral part of PlantWeb® and AMS software.

PlantWeb provides comprehensive machine health in conjunction with the Ovation® and DeltaV™ process control systems.

AMS software provides maintenance personnel with advanced predictive and performance diagnostic tools to accurately determine machine failures at an early stage.

Related Product Recommendations:

IC660TBD024K Genius I/O Terminal Assembly Module

IC754CSX06CTD General Electric Quick Panel Touch Screen

44A751101-G01 Processor Module

8115-DO-DC 8-Channel Digital Output Module

DeltaVrm VerticalPlus Input/Output Subsystem carrier

IC687BEM713B Fanuc 90-70 Series Bus Transmitter Unit

DS200FCGDH1B GATE ASSIGNMENT AND STATUS CARD (FCGD)

RS-FS-9001 362A1052P404 Flame Sensor/Detector

FBM203 P0914SV Channel Isolated 8-Input RTD

FBM204 P0914SYI/O Module 4 Channel

369-C101 Motor Management Relay

369-LO-0-M-F-E-0-0 Motor Management Relay

Emerson A6500-UM Universal Measurement Card

The A6500-UM Universal Measurement Card is an integral part of the AMS 6500 ATG machine protection system.

The card is equipped with 2 sensor input channels (independent or combined, depending on the selected measurement mode).

The most common sensors can be used, such as eddy current, piezoelectric (accelerometers or velocimeters), seismic (electrodynamic),

LF (Low Frequency Bearing Vibration), Hall Effect and LVDT (in combination with A6500-LC) sensors.

In addition, the card contains five digital inputs and six digital outputs.

Measurement signals are transferred to the A6500-CC Com card via the internal RS 485 bus and converted to Modbus RTU and

The measurement signals are transferred to the A6500-CC Com Card via the internal RS 485 bus and converted to the Modbus RTU and Modbus TCP/IP protocols for further transmission to a host computer or analysis system.

Additionally, the Com Card can communicate with a PC/laptop connection via the USB www.honeywell-diver.com interface on the panel, allowing the card to be configured and measurements to be displayed.

This allows the card to be configured and the measurement results to be displayed. Measurement results can also be output via 0/4 – 20 mA analogue outputs.

These outputs have a common ground and are electrically isolated from the system power supply.

The A6500-UM Universal Measurement Card operates in the A6500-SR system rack, which also provides the supply voltage and signal connections.

The A6500-UM Universal Measurement Card provides the following functions:

Absolute shaft vibration

Relative shaft vibration

Shaft eccentricity

Housing piezoelectric vibration

Thrust and rod position, differential and shell expansion, valve position

Velocity and keys

Dual-channel, 3U size, 1-slot plug-in modules that cut cabinet space requirements in half compared to traditional four-channel 6U cards.

API 670 compliant, hot-swappable modules.

Remotely selectable limit doubling and trip bypass.

Pre/post buffered and proportional outputs, 0/4 – 20mA output.

Self-test features include monitoring hardware, power inputs, hardware temperature, sensors and cables,

Hardware temperature, sensors and cables

Related Product Recommendations:

IC754CSX06CTD General Electric Quick Panel Touch Screen

44A751101-G01 Processor Module

8115-DO-DC 8-Channel Digital Output Module

FBM203 P0914SV Channel Isolated 8-Input RTD

FBM204 P0914SYI/O Module 4 Channel

369-C101 Motor Management Relay

DeltaVrm VerticalPlus Input/Output Subsystem carrier

IC687BEM713B Fanuc 90-70 Series Bus Transmitter Unit

DS200FCGDH1B GATE ASSIGNMENT AND STATUS CARD (FCGD)

RS-FS-9001 362A1052P404 Flame Sensor/Detector

369-LO-0-M-F-E-0-0 Motor Management Relay

Emerson CSI A6620 Four-Channel Process Input Monitor

Designed for high reliability on the plant’s most critical rotating machinery, the Process Input Monitor monitors process inputs such as temperature, pressure, load, and more.

This 1-slot monitor can be used with other CSI 6500 monitors to form a complete API 670 machinery protection monitor.

Applications include steam, gas, compressor and water turbine machinery.

The main function of the Process Input Monitor is to accurately monitor process parameters and reliably protect machinery.

parameters and reliably protect the machine by comparing the parameters to alarm setpoints, actuating alarm and

Setpoints, actuate alarms and relays to accurately monitor process parameters and reliably protect the machine.

Process inputs can be ±1 V, ±10 V, or 0/4-20 mA.

The CSI 6500 Machine Health Monitor is an integral part of PlantWeb® and the AMS Suite.

PlantWeb combines the Ovation® and DeltaV™ process control systems to provide operators www.honeywell-diver.com with an integrated view of machine health.

The AMS Suite provides maintenance personnel with advanced predictive and performance diagnostic tools to accurately determine machine failures at an early stage.

Features:

Four-channel, 3U size, 1-slot plug-in module that cuts cabinet space requirements in half compared to traditional four-channel 6U cards

API 670-compliant hot-swappable modules

Remotely selectable limit multiplication and trip bypass

Pre- and post-buffered and proportional outputs, 0/4-20 mA outputs, 0 – 10 V outputs

Self-test features include monitoring hardware, power inputs, hardware temperature, sensors, and cables

For IMR600020 chassis

Emerson Rosemount 4088 Multivariable Transmitter

With the innovative Rosemount 4088 multivariable transmitter, you can not only measure today, the

But you can maximise measurement accuracy and output efficiency throughout the life of your equipment.

This versatile device delivers reliable, stable signals, so you can achieve unrivalled data accuracy

and manage changing conditions more effectively to maximise profits.

Because the 4088 is easy to configure and calibrate, you can install new measurement points faster, reducing the time it takes to get up and running.

It also requires less maintenance over time, so your staff can focus on optimising other aspects of your operation.

And should a problem arise, Emerson experts are ready to provide fast, www.honeywell-diver.com comprehensive support so you can get back to what you do best – producing and maximising profits.

Rosemount 4088 Product Overview

Industry-Leading Performance and Functionality

Designed for optimal flow performance, the Rosemount 4088 uses superior sensor technology to deliver unmatched accuracy in a wide range of operating conditions.

Superior performance allows you to better control your operations and maximise profits.

Flexible communication with Modbus® or Bristol® standards

Asynchronous/Synchronous Protocol (BSAP)/MVS

Designed to integrate easily with existing or new systems, the Rosemount 4088 can

communicate using Modbus or BSAP/MVS protocols. Baud rates up to 19200 allow traffic computers to communicate faster and more efficiently.

The Rosemount 4088’s local LCD display shows both measurement data and the results of the flow computer’s calculations.

such as “Instantaneous Flow” or “Accumulated Flow for the last 24 hours”. This not only simplifies maintenance, but also makes well operations clearer.

Plunger Lift Measurement Range Expanded

The Rosemount 4088 extended range option incorporates new sensor technology that ensures peak flow rates are captured without compromising performance in the normal operating range.

This helps eliminate accounting discrepancies that can lead to disputes.

Reduced Power Consumption

The advanced electronics in the Rosemount 4088 consume less power, which means a single power supply or solar panel can run more transmitters.

Reverse wiring protection also ensures that transmitters are not damaged if the power supply is incorrectly connected.

Accurate RTD measurements through sensor matching

The Rosemount 4088 reduces process temperature and flow errors by using Callendar-Van Dusen constants to define the unique characteristics of RTD.

Seamless Transition from Legacy Products

To ensure a smooth transition from Emerson legacy products, the Rosemount 4088 will communicate using the same protocols as direct replacements.

This will allow users to quickly replace legacy products with the Rosemount 4088, minimising downtime and reducing engineering and installation costs.

Reduced engineering and installation costs

Excellent Warranty and Stability

The Rosemount 4088 is built to last, with a stability specification of up to 5 years and a 12-year warranty. This helps ensure that your investment in Rosemount technology continues to pay off for years to come.

Emerson A6125 Dual Channel Enclosure Piezo Vibration Monitor

Designed to provide high reliability for a plant’s most critical rotating machinery, the Casing Piezo Vibration Monitor monitors casing vibration via accelerometers.

This single tank monitor is used in conjunction with other CSI 6500 monitors to form a complete API 670 machinery protection monitor.

Applications include steam, gas, compressor and hydraulic turbine machinery.

The primary function of the case piezoelectric vibration monitor is to accurately monitor case vibration and reliably protect machinery by comparing vibration parameters to alarm set points, actuated alarms and relays.

A case piezoelectric vibration sensor, sometimes referred to as a case absolute vibration sensor (not to be confused with a shaft absolute vibration sensor).

is an accelerometer or velocimeter whose output is acceleration or velocity.

Bearing case vibration monitors monitor the vibration of the bearing case in terms of acceleration or velocity in g (mm/sec).

Since the sensor is mounted on the bearing box, the vibration of the bearing box can be affected by many different sources.

These include rotor motion, foundation and bearing box stiffness, blade vibration, neighbouring machinery, etc.

When replacing ffeld sensors, many seismic sensors are replaced with piezoelectric sensors.

The 6125 monitor is designed for the new piezoelectric sensors.

Shell measurements are common in nuclear power applications. Case measurements using piezoelectric sensors are also common in rolling bearing machines and gearboxes.

Emerson recommends the use of piezoelectric sensors and piezoelectric sensor monitors when updating ffeld sensors and monitors.

The CSI 6500 is an integral part of PlantWeb® and the AMS Suite.

PlantWeb combines the Ovation® and DeltaV™ process control systems to provide operators with an integrated view of machine health.

The AMS Suite provides maintenance personnel with advanced predictive and performance diagnostic tools to accurately determine machine failures at an early stage.

Functional Features:

Dual-channel, 3 U-sized, 1-slot plug-in module that cuts cabinet space requirements www.honeywell-diver.com in half compared to traditional four-channel 6U cards

API 670 compliant, hot-swappable modules

Remotely selectable limit multiplication and trip bypass

Pre- and post-buffered and proportional outputs, 0/4-20 mA outputs, 0 – 10 V outputs

Self-test features include monitoring hardware, power inputs, hardware temperature, sensors, and cables,

Hardware temperature, sensors and cables

Use with piezoelectric accelerometer and velocimeter sensors

Related Product Recommendations:

5X00419G01 Ethernet Link Controller

1769-PB4 Power Module

IC660TBD025 GeniusI/O Terminal Assembly Module

BSFC-01C Charge Controller Board SP Kit Gate Driver Boards

IC660TBD024K GeniusI/O Terminal Assembly Module

1769-OF8C Analog Output Module

ILX56-MM Message Manager for Industrial Communications

BSFC-02C Charge Controller Universal Brake Chopper

1769-OF2 Analog Output Module

Search for products

Back to Top
Product has been added to your cart