Call us 24/7+86 15396212224

DEIF MTR-3 Multi-sensor

At the size of a portable hard disk, the MTR-3 sensors are lightweight and compact, yet each one delivers comparable performance to four standard sensors, the

Measures and calculates AC voltage, AC current, active/reactive/apparent power, power factor, frequency, kWh, kVA, total harmonic distortion, dynamic and maximum demand.

The standard response time of the series is less than 200 ms, with the MTR-3F’s ultra-fast response time of ≤50 ms.

Modbus data refresh times are also only 50 ms, and data can be transferred at up to 115.200 bits/sec.

The accuracy class is 0.5 for analog data and 0.3 for Modbus data.

With configurable outputs for more than 50 parameters and a universal power supply (19-300V DC, 40-276V AC).

DEIF’s sensors can be installed and reconfigured in the future to meet the needs of virtually any application.

DEIF’s MTR-3 is a cost-effective, compact and powerful solution for sensor applications.

It has been developed for measuring single-phase and www.honeywell-diver.com three-phase network topologies and provides measurement data via RS485 Modbus communication.

Up to four analog outputs can be configured quickly and easily by simply connecting a USB 2.0 interface. Up to four analog outputs.

MTR-3 Features

Suitable for all single-phase and three-phase network topologies

Up to 1000 VL-L AC input

Accuracy class 0.5 or 0.3

Up to 4 analog outputs

Fast response time, minimum ≤ 50 ms

Measurement of more than 50 parameters

RS485 serial Modbus communication

Fully configurable via USB, no auxiliary power required

19 to 300 V DC/40 to 276 V AC universal power supply

DEIF SGC 110 Single Genset Controller

The SGC 110 is a modern genset controller with a user-friendly HMI and full graphic LCD.

The controller comes with powerful software. A wide www.honeywell-diver.com range of inputs and outputs support a variety of industry-standard functions in diesel/gasoline genset applications.

The DEIF Smart Connect software provides the flexibility to configure each individual input and output for a specific function or application.

All parameters can also be configured on the controller.

Key features

– Genset controller with configurable inputs:

Five digital inputs

Three analog inputs

– Six digital outputs

– Effective monitoring of genset performance

– Precise monitoring of genset output voltage and frequency

– Remote start/stop

– Deep sleep mode for extended battery life

– Preheat output to assist engine start

– Connects to PC via USB port for customized configuration

– Full graphic backlit display with power saving features

– Records the latest 30 events

DEIF SGC 410 Single Genset Controller

OVERVIEW

The SGC 410 controller is a modern island genset controller with a user-friendly HMI and full graphic LCD.

It includes voltage and frequency measurement of the genset as well as electrical load measurement (True RMS).

Configurable analog and digital inputs/outputs are provided for various www.honeywell-diver.com functions.

Remote communication is available via RS-485 Modbus and CAN ports.

The genset can be started and stopped remotely using the remote start/stop function.

Deep sleep mode is a useful feature that extends battery life by suspending the normal function of the controller when the genset is shut down.

Monitor engine safety, electrical load, on-site standby battery voltage, and shelter temperature (to reduce fuel consumption).

Configure parameters from a PC using the DEIF Smart Connect utility software. Connects to the PC via the controller’s USB Type B port.

Main Functions

– Automatic, manual and remote start/stop modes with night limit option

– 17 inputs, configurable

5 resistive inputs

2 analog I/V

1 differential

9 digital

– 7 digital outputs, configurable

– Modbus connection via RS-485

– Configurable manually from PC via controller front buttons or using DEIF Smart Connect utility software

– Backlit full graphic LCD with power saving feature for extended battery life

– Supports battery charging alternator I/O interface

– Supports automatic modes (on-site battery monitoring, remote start/stop, auto-run, and cycling) and manual modes of operation

– Magnetic pickup unit (MPU) interface for engine RPM measurement

– Auto run mode (2 events) to start and stop the genset at pre-set times

– Monitoring of the generator’s single/three-phase voltage, frequency, load current and power factor

– Monitoring of engine safety parameters such as lubricant pressure, engine temperature, oil level, etc.

– Monitor telecom site backup battery level and shelter temperature to minimize engine operation and fuel consumption at telecom tower sites

– Controls digital outputs such as start relays, fuel relays, alarm horns, etc.

– Event log of 100 events with real-time clock (RTC) stamps and engine runtime information

– Engine start, engine trip, engine run hours, genset kWh, kVA, kWh counters

– CANbus for engine communication with support for Stage 5/Level 4 final version

SGC 410 Technical Specifications

Power supply

– Rated voltage: 12/24 VDC

– Operating range: 8 to 32 VDC

– Transient power supply, ISO 7637-2 compliant

Operating conditions

– Operation: -20 to 65 °C

– Storage: -30 to 75 °C

– Conforms to IEC 60068-2-1. 2

Environmental

– Vibration: 2 G in X, Y, and Z axes per IEC 60068-2-6

– Shock: 15 g, 11 ms per IEC 60068-2-27

– Humidity: 0 to 95 % RH per IEC 60068-2-78

– Enclosure rating Front gasketed IP65 per IEC 60529

– EMI/EMC: IEC 61000-6-2. 4

Approvals

– CE marking:

Complies with the EU Low Voltage Directive: EN 61010-1 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 1: General requirements.

Compliance with EU EMC Directive EN 61000-6-2. 4

DEIF GPU-3 graphics card Generator protection unit

Easy to operate and configure, DEIF’s Generator Protection Unit (GPU-3) is the ideal controller for PLC-based power management systems.

Generator Protection Unit

Controller for PLC-based power management systems

DEIF’s Generator Protection Unit (GPU-3) is easy to operate and configure and is the ideal controller for PLC-based power management systems.

The GPU-3 provides comprehensive generator protection and synchronization functions. Easily connected to PLCs, SCADA systems, etc. via serial communication.

The unit has all the necessary three-phase measurement circuits and displays all values and alarms on a high quality LCD screen.

The optional Engine Interface Card also features a separate power supply and a separate microprocessor that turns the GPU-3 into an engine control unit with start/stop and protection functions.

and a separate microprocessor. In the event of a GPU3 processor failure, the www.honeywell-diver.com Engine Interface Card will go into backup mode, ensuring uninterrupted engine monitoring.

monitoring. In the event of a shutdown alarm, the engine automatically shuts down, making it a reliable solution for controlling and monitoring the genset.

Customize the application to your needs by downloading and upgrading the software for free at www.deif. com:

Dedicate specific functions or logic conditions to different inputs and outputs and adapt all sequences to your requirements.

Features of the GPU-3

► Generator/Bus Protection

► Synchronization

Multiple display units and operator panels can be set up

► Engine protection for backup channels in case of shutdowns

► Motor control and communication

DEIF AGC-4 Mk II Generator Set Automatic Controller

Automatic Genset Controller AGC-4 Mk II

The automatic genset controller AGC-4 Mk II can be used as a single genset controller.

In addition, multiple AGCs can be connected in a complete power management system for synchronizing projects, islanding or paralleling to a power source.

Ideally suited for mission-critical applications such as hospitals and data centers, the generator controller is capable of providing standby power in as little as 6 seconds.

Power management for up to 992 generator sets

Implementing the AGC-4 Mk II controller gives you a variety of options. With core power management, you can run up to 32 gensets.

If you need more than 32 gensets, Extended Power Management allows you to group generators and reach up to 32 mains or 32 groups and 992 gensets.

Extensive Engine Control for Tier 4/Stage V Compliance

The AGC-4 Mk II supports many popular engine protocols, with www.honeywell-diver.com more added with each software update.

The controller meets Tier 4 Final/Stage V emissions requirements.

AGC-4 MK II

Supports Global Grid Norms

The controller complies with virtually all grid code regulations used around the world, including (but not limited to) IEEE 1547. VDE 4110/4105. EN50549-1/2 and ENA G99.

Protection and grid support features are included, giving you a “one controller fits all” solution.

Hybrid Applications

The AGC-4 Mk II is plug-and-play with DEIF’s ASC-4 Hybrid Controller, making it easy to integrate diesel genset applications into a wide range of hybrid power units.

The market-leading solution maximizes sustainable power penetration while always ensuring sufficient spinning reserves when photovoltaic (PV) production declines.

Intuitive external touch screen

You can choose from a number of different display and control options for the AGC-4 Mk II, ranging from an LCD display and buttons to a range of touchscreens, providing you with greatly improved overview and control options.

TDU – different sizes

Remote communication and control

The automatic genset controller AGC-4 Mk II supports serial communication protocols including Modbus (RS-485. USB and TCP/IP) and Profibus.

This feature allows you to monitor and control your genset/power plant from a remote location.

Provides backup power in less than 6 seconds, ideal for mission-critical applications

With its integrated pre-excitation closing (boost synchronization) function, the AGC-4 Mk II ensures that standby power is available in as little as 6 seconds.

Combined with the hot standby controller/dual redundancy option for all locations, the AGC-4 MK II is ideally suited for all types of mission-critical power applications such as data centers, hospitals, airports and fish farms.

N+X Redundancy

With the introduction of the N+X feature, the AGC-4 Mk II now offers enhanced security for critical power applications.

You can decide how many additional gensets should be run for a given load.

This also benefits the environment because you don’t have to run all the gensets – you can define how many additional gensets should be run, even if the load is dynamic.

Unique rental genset applications

The controller has been designed with ease of operation in mind. The automatic genset controller AGC-4 Mk II features up to four parameter settings that can be switched with a single touch of the touch screen.

You can easily set and lock parameters to ensure that your rental equipment is fully protected.

The AGC-4 Mk II includes the unique EasyConnect feature, which means the controller can automatically detect and calibrate all gensets.

The AGC-4 Mk II makes transformer maintenance easier and more flexible with remote maintenance boxes and multiple gensets without jeopardizing the power supply.

When performing transformer maintenance, the AGC-4 Mk II allows you to run 32 gensets of different types and sizes in parallel through power management, allowing you to use smaller gensets.

For example, Tier 4/Stage V gensets can handle larger transformers because up to 32 gensets can be applied.

System testing in a safe environment

DEIF’s simulation solutions come standard with the automated genset controller AGC-4 Mk II, enabling you to interact with the controller in a controlled and safe environment without damaging any equipment.

To perform a complete test of a power management system, all you need to do is turn on the controller and connect communications.

Search for products

Back to Top
Product has been added to your cart