Category: B&R

The X20 Compact-S series of controllers is available in different versions. In this way, the customer gets the product that best meets the requirements of the machine both technically and economically.

The processor performance of the compact controllers ranges from 166 MHz (compatible) to 667 MHz.

The most economical models are equipped with 128 MB RAM, 8 kB non-volatile RAM and a 256 MB flash drive.

The most powerful Compact-S controllers have cycle times as low as 400 µs. 512 MB of RAM, 64 kB of non-volatile RAM, and a 256 MB Flash drive.

RAM, 64 kB non-volatile RAM, and a 2 GB internal flash drive.

The controller offers a wide range of communication options via POWERLINK, Ethernet, USB and RS232. Optional RS485 or CAN interfaces are also available.

If an application requires additional interfaces, the controller can be modularly expanded with 1 or 2 X20 interface slots.

This allows the use of the entire X20 fieldbus interface product range.

The Compact-S controllers are fanless, battery-free and therefore completely maintenance-free.

– ARM Cortex-A9 processor from 166 MHz (compatible) to 667 MHz and integrated I/O processor

– Depending on model: POWERLINK with polled response chain

– 2 on-board USB

– Up to 2 module interface expansion slots

– 128 to 512 MB DDR3 SDRAM

– 256 MB to 2 GB on-board flash drive

– Fanless

– Battery-free

– Extremely compact

Coated Modules

Coated modules are X20 modules with a protective coating on the electronic components. www.honeywell-diver.com This coating protects the X20c modules from condensation and corrosive gases.

The electronics of the modules are fully compatible with the corresponding X20 modules.

For simplicity, only pictures of uncoated modules and module IDs are used in this datasheet.

The coating has been certified to the following standards:

– Condensation: BMW GS 95011-4. 2x 1 cycle

– Corrosive gases EN 60068-2-60. method 4. exposure 21 days

Type X20CP0410

Description:

ARM Cortex-A9 processor with 166 MHz (compatible) and integrated I/O processor

On-board Ethernet

2 on-board USB

128 MB DDR3 SDRAM

256 MB on-board flash drive

Fanless design

Battery-free

Very Compact

The controllers in the X20 Compact-S series are powerful and compact. The fanless, battery-free design of these controllers means they are completely maintenance-free.

The X20CP0410 is equipped with an ARM Cortex-A9 166 MHz compatible processor, 128 MB RAM and 256 MB internal flash drive.

There are 8 kilobytes of FRAM available for storing the remaining variables.

The controller offers a number of communication options via Ethernet, USB and RS232. Optional RS485 or CAN interfaces are available.

Based on state-of-the-art Intel® ATOM™ processor technology, the X20 CPUs cover a wide spectrum of demands.

They can be implemented in solutions ranging from standard applications to those requiring the highest levels of performance.

The series starts with Intel® ATOM™ processor 333 MHz compatible models – X20CP1583 and X20CP3583.

With an optimum price/performance ratio, it has the same basic features as all of the larger CPUs.

The basic model includes USB, Ethernet, POWERLINK V1/V2 and removable CompactFlash.

The standard Ethernet interface is capable of handling communication in the gigabit range.

For improved real-time network performance, the onboard POWERLINK interface www.honeywell-diver.com supports poll response chaining mode (PRC).

In addition, there are up to three multi-purpose slots for additional interface modules.

• Intel® ATOM™ 1600/1000/600 Performance with integrated I/O processor

• Entry-level CPU is Intel® ATOM™ 333 MHz-compatible with integrated I/O processor

• Ethernet, POWERLINK V1/V2 with poll response chaining and onboard USB

• 1 or 3 slots for modular interface expansion

• CompactFlash as removable application memory

• Up to 512 MB DDR2-SRAM according to performance requirements

• CPU redundancy possible

• Fanless

• Extremely compa

Description:

.Intel Atom 1.6 GHz processor with additional I/O processor

. Onboard Ethernet, POWERLINK with polled response chain and USB.

. 1 slot for modular interface expansion .

.CompactFlash as removable application memory

.512 MB DDR2 memory

.512 MB DDR2 RAM Fanless

The X20CP1586 is a powerful controller for the X20 system.

This controller is especially suited for applications that require short cycle times, must process large amounts of data, or perform floating-point operations.

It is clocked at 1.6 GHz and comes with 512 MB of DDR2 SDRAM.

USB, Ethernet, POWERLINK and removable CompactFlash are included as standard features.

The standard Ethernet interface is capable of handling communications in the gigabit range.

For more real-time network performance, the on-board POWERLINK interface supports Polled Response Chain mode (PRC).

The controller is equipped with a slot for an X20 communication module.

By using communication modules, various bus and network systems can be easily integrated into the X20 system.